Burner kind of pyrolytic clinical waste burner capability

Together with the following technical data:

1.      One pharma solid waste incinerator unit comprising two combustion chambers and based on steel base with scrubbing

system.

2.      Working hour /day: minimum 10 hours/day.

3.      Ability: Approximated 150 kg/hr. Over 10 hrs.

4.      Wastes characteristics:

·         BULK density: 70 — 100 kg/ bm³.

·         Calorific value: 2000-3000 kcal / hr.

·         Moisture content: 20-30%by weight.

·         Ash content: 2 — 8% by weight.

·         Plastic content: 15-20 percent by weight.

5.      Two combustion chambers.

6.      Operating temperatures:

·         First room: less than 700 – 800 °c.

·         Second room: less than 1200 °c (during steady operation).

7.      The burners should be automatically switched off if some of the combustion chambers is open.

8.      The burners of the first and second combustion chambers are selected for burning diesel oil (light fuel).

9.      Automatic loader and unloader to be supplied.

10.     Exhaust gases to be comply with International Environmental code and requirements.

Water temperature: 800 to 1000 ° C;
Fuel: coal;

Including:Incinerator: Structure to be specified
Temperature of more than 1100 ° C obtained;
Aspiration: natural

– A getting cage for biomedical waste;

– A combustion chamber with a chimney using a filter to retain the ashes;

Chimney section: about 300 cm; using a minimum height of 6 m

Door size: approximately 50×60 cm