SOLID WASTE INCINERATOR

Secondary Chamber    Temperature *    1100 — 1300 deg. C
Dimensional Sketch, Operation & Installation Manuals.     Required
Away — Gas System    Required
Thickness    25 ” minimum
Delivery    Karachi Sea Port – Pakistan

The details of Components of incinerator is as follows:
System Status & Alarms    Required for all vital parameters.
Media    Slightly acidic
Heat Insulation    Required for indoor installation
1: Main Controlled Air
Chambers *    Dual Chamber.
Life Span *    10 — 15 years.
Insulation    Material    Ceramic Fiber
Installation Requirements.     As low as possible. Almost Plug & Play type.

Main chamber — Consists of a monolithic high grade refractory concrete with high grade insulation backing,. Utilising a refractory hearth or equivalent for continuous ash removal.

Secondary Chamber — Consists of high density, low thermal mass refractory ceramic fiber with an innovative low emissivity protective coating.
Temperature Control to Primary & Secondary Chambers    Required
Ingredients to be burnt Cotton, Rubber, PVC Sheets, PE Gloves, Oil, Plastic Bottles, Paper etc..
Feeding & Ash Removing     System    Air Tight ventilating locked doors ( Feeding from Top will be preferred)
Rating Temperature    1600 — 1800 deg. C

Secondary Chamber    Temperature *    1100 – 1300 deg. C
Heating Source    Natural Gas + Propane or Fuel Oil as an additional source
Off – Gas Residence Time     2 Seconds.
Refractory Material    Material *    Alumina ( 56 – 80 % Pure )
Lining *    SS 316L
Life Span *    10 – 15 years.
Rating Temperature    1600 – 1800 deg. C
Media    Slightly acidic
Insulation    Material    Ceramic Fiber
Thickness    25 “ minimum
Feeding & Ash Removing     System    Air Tight ventilating locked doors ( Feeding from Top will be preferred)
Spares    Required for 5 Years trouble free operation