Incinerator sort of pyrolytic medical waste incinerator ability

Including:Incinerator: Structure to be specified

Together with the following technical information:

1.      One pharma solid waste incinerator unit containing two combustion chambers and based on steel base with scrubbing



3.      Capacity: Approximated 150 kg/hr. Over 10 hrs.

4.      Wastes features:

·         BULK density: 70 — 100 kg/ bm³.

·         Calorific value: 2000-3000 kcal / hr.

·         Moisture content: 20-30%by weight.

·         Ash content: 2 — 8 percent by weight.

·         Vinyl content: 15-20 percent by weight.

5.      Two combustion chambers.

6.      Operating temperatures:

·         First room: less than 700 – 800 °c.

·         Second room: less than 1200 °c (during steady operation).

7.      The burners should be automatically switched off if some of the combustion chambers doors is open.

8.      The burners of the first and second combustion chambers are selected for burning diesel oil (light fuel).

9.      Automatic loader and unloader to be supplied.

10.     Exhaust gases to be comply with International Environmental code and requirements.

– A receiving cage for biomedical waste;

– A combustion chamber using a chimney using a filter to keep the ashes;

Chimney section: about 300 cm; using a minimum height of 6 m

Door dimensions: approximately 50×60 cm