50 to 60kg/hr and 100 into 120kg/hr diesel powered incinerator.1. 2. Required Incinerating Capacity:
Approximately 4,500 tons per year. The incinerator must capable of incinerating type of waste mentioned or any combinations thereof at a rate of 3 mph. The machine shall be designed to operate for at least five consecutive times nonstop if required.
3. Incinerator Design Requirements:
The system should be simple in design and operation, with minimal electronic components.
3.1 Specific Data that must be offered with the Design
3.1.1 Incinerator Data:
a.Batch Load Capacity;
b.Primary chamber design (thickness, diameter, length, insulation, lining, volume hearth area, weight); c. Secondary chamber design (thickness, diameter, length, insulation, lining, quantity hearth area, weight);
c.Exhaust stack layout (thickness, diameter, lining variety of segments, complete stack length, height above base, weight);
d.Type and amount of auxiliary fuel burners;
e.Fuel requirements — type, amounts;
f.Electrical power use;
g.Electrical services required;
h.Water requirements — amounts;
i.Any other input requirements and consumables;
j.Temperatures to be achieved to guarantee suitable destruction of waste and comply with required air pollution control standards (EU Waste Incineration Directive 2000/76);
k.Residence time to ensure suitable destruction of waste and comply with required air pollution control standards;
l.Potential weight loss (percent ) of waste;
m.Options to automatically and continuously monitor and record information such as dates, time of day, batch sequential number;
n.A temperature or visual indicator to display heat status of gear; and
o.Details on picture displays and / or computer recording apparatus.
3.1.2 Air Pollution Control System Data
a.The type of air pollution control equipment selected will comply with EU WID Waste Incineration
c.Details about the gas cleaning systems to improve the removal of fine particles, acid fumes and heavy
e.Details on components, such as:
condenser / absorber;
entrainment separator and
emissions pile (s).
Electrical power use;
f.Any other input demands and consumables (e.g. lime);
g.Details on graphic screens and / or computer recording apparatus;
h.Environmental requirements – The system will have the capacity / capability to comply with relevant air quality criteria; i.e.EU Waste Incineration Directive 2000/76. (or similar standards and criteria acceptable to the Australian Commonwealth Government Department of the Environment);
i.Specify air pollution parameters that are monitored.
3.1.3 Site Requirements for the Incinerator
a.Total land area dimentions;
b.Infrastructure required ( water supply, power supply drainage); and
c.Any specific ecological or climatic/meteorological aspects that needs consideration.
3.1.4 Housing Requirements and Design
a.Details on demands for a safe enclosure to the incinerator and associated air pollution control system. The enclosure will be designed to achieve occupational health and safety requirements such as: a. Free space can be found on either side and heat radiation is kept at a minimum giving the operators an:
b.easy viable environment and ventilation;
c.There are protected storage facilities for waste;
d.There are measures to avoid vermin and insects;
e.The materials are of sufficient structural depth for safety and to withstand sea corrosion.
4. Training, Maintenance And Instruction Manuals
4.1 Maintenance Manuals
Provide details on maintenance requirements, such as:
a.General cleaning and maintenance — frequency, skills / specialized experience required;
b.Expected life span of parts and the system as a whole;
c.Expected frequency of the requirement for replacement of parts;
d.Availability of parts and location of providers;
e.Frequency of need for major overhauls; and
f.Estimated down time needed for general maintenance and major overhauls.an incinerator for our deceased animals in the farm particularly chicken.